COMPRESSION
EFFICIENCY AND RELIABILITY
EFFICIENCY AND RELIABILITY
OVERVIEW
Dancomair is well recognised as a compressed air sales and service company specialising in high quality, fit for purpose and often specially designed equipment to suit specific client applications. Dancomair designs, fabricates and assembles air compressors, dryers and pressure vessels in its Rawang factory maintaining a highly skilled team and sells through a dealer network and direct sales within Malaysia.
The Dancomair product comes with a manufacturer’s warranty and either meets or exceeds the relevant Malaysian Standards.
Products include Oil free and Oil Lubricated compressors in reciprocating or rotary screw, Refrigerative and Desiccant dryers, Filtration, Pipe Spools and Pressure Vessels together with associated equipment such as solenoid valves, safety valves, pressure switches and auto drains.
Dancomair Air Compressors offer maximum efficiency and reliability and are available in a variety of technology, sizes and pressures to suit most applications.
LIGHT & HEAVY INDUSTRIAL COMPRESSORS
LIGHT & HEAVY
INDUSTRIAL COMPRESSORS
RECIPROCATING COMPRESSORS
Reciprocating or as some refer, piston type compressors are available in single and two stage versions, with single stage or up to say 115psi, most are used for industrial applications using conventional tools and the two stage compressor are generally used for specific demands and automotive applications.
Reciprocating compressors are available in 1 – 20 hp in single and three phase electric, diesel and petrol drives, with and without electric start and an off road range of 2.5cfm at 100psi in 12 and 24V DC direct couple drive.
Visit our Reciprocating Compressors and Compressor Pumps range or contact us for more details.
ROTARY SCREW COMPRESSORS
Rotary screw technology has many features, but the most significant is that they can run at 99.9% duty and transmit very low sound emissions and are ideal for constant demand applications and are available in the 7.5bar to 13bar. The units are available from 5hp to 100hp as a stock range with higher flow models available upon request.
Visit our rotary screw compressors range or contact us for more details.
RECIPROCATING COMPRESSORS
Reciprocating or as some refer, piston type compressors are available in single and two stage versions, with single stage or up to say 115psi, most are used for industrial applications using conventional tools and the two stage compressor are generally used for specific demands and automotive applications.
Reciprocating compressors are available in 1 – 20 hp in single and three phase electric, diesel and petrol drives, with and without electric start and an off road range of 2.5cfm at 100psi in 12 and 24V DC direct couple drive.
Visit our Reciprocating Compressors and Compressor Pumps range or contact us for more details.
ROTARY SCREW COMPRESSORS
Rotary screw technology has many features, but the most significant is that they can run at 99.9% duty and transmit very low sound emissions and are ideal for constant demand applications and are available in the 7.5bar to 13bar. The units are available from 5hp to 100hp as a stock range with higher flow models available upon request.
Visit our rotary screw compressors range or contact us for more details.
RECIPROCATING COMPRESSORS
Reciprocating or as some refer, piston type compressors are available in single and two stage versions, with single stage or up to say 115psi, most are used for industrial applications using conventional tools and the two stage compressor are generally used for specific demands and automotive applications.
Reciprocating compressors are available in 1 – 20 hp in single and three phase electric, diesel and petrol drives, with and without electric start and an off road range of 2.5cfm at 100psi in 12 and 24V DC direct couple drive.
Download our brochures here or contact us for more details.
ROTARY SCREW COMPRESSORS
Rotary screw technology has many features, but the most significant is that they can run at 99.9% duty and transmit very low sound emissions and are ideal for constant demand applications and are available in the 7.5bar to 13bar. The units are available from 5hp to 100hp as a stock range with higher flow models available upon request.
Download our brochure here or contact us for more details.
DRYERS & FILTRATION
DRYERS & FILTRATION
DRYERS
The Clisby range of dryers fall into two categories, Refrigerant and Desiccant, the refrigerant type are efficient and ideal for either reciprocating or rotary screw compressors, they come with environmentally approved gas and will provide dew points of 3 deg C in constant running mode, the desiccant on the other hand can bring dryness down to -70deg dew point and are available in pressure swing heatless twin tower or regenerative and heated type with efficiency programmed recycling on the regenerating cycle.
Please visit our Dryers product page or contact us for more details.
FILTRATION
Filtration of compressed air is essential for most downstream activities and Dancomair will have a model available to meet all inlet conditions. Filters are generally threaded up to 2” and thereafter flanged. Filters normally cascade in process starting with 1 micron down to 0.01 micron and can also have features to remove odour and hydrocarbons for applications such as food, medical or breathing air.
Please visit our Filtration product page or contact us for more details.
DRYERS
The Clisby range of dryers fall into two categories, Refrigerant and Desiccant, the refrigerant type are efficient and ideal for either reciprocating or rotary screw compressors, they come with environmentally approved gas and will provide dew points of 3 deg C in constant running mode, the desiccant on the other hand can bring dryness down to -70deg dew point and are available in pressure swing heatless twin tower or regenerative and heated type with efficiency programmed recycling on the regenerating cycle.
Please visit our Dryers product page or contact us for more details.
FILTRATION
Filtration of compressed air is essential for most downstream activities and Dancomair will have a model available to meet all inlet conditions. Filters are generally threaded up to 2” and thereafter flanged. Filters normally cascade in process starting with 1 micron down to 0.01 micron and can also have features to remove odour and hydrocarbons for applications such as food, medical or breathing air.
Please visit our Filtration product page or contact us for more details.
PRESSURE VESSELS
All pressure vessels sold by Dancomair are DOSH compliant and are available in a variety of sizes from horizontal to vertical. Dancomair maintains a design department that will design and fabricate pressure vessels of standard or specific features that may include high pressure, large volume with special paint requirements. The range of pressure vessels is generally from 25 litres to 100,000 litres. Our tanks are built in accordance with the requirements of ASME Section VIII.
Please visit our Pressure Vessel product page or contact us for more details.
ACCESSORIES & SPARES
Dancomair maintains a large inventory of spare parts for the equipment and products it sells and also a comprehensive stock of valves, pressure gauges, drains, electric motors, switches as well as replacement compressors.
Please contact us for more details.
PRESSURE VESSELS
All pressure vessels sold by Dancomair are DOSH compliant and are available in a variety of sizes from horizontal to vertical. Dancomair maintains a design department that will design and fabricate pressure vessels of standard or specific features that may include high pressure, large volume with special paint requirements. The range of pressure vessels is generally from 25 litres to 100,000 litres. Our tanks are built in accordance with the requirements of ASME Section VIII.
Please visit our Pressure Vessel product page or contact us for more details.
ACCESSORIES & SPARES
Dancomair maintains a large inventory of spare parts for the equipment and products it sells and also a comprehensive stock of valves, pressure gauges, drains, electric motors, switches as well as replacement compressors.
Please contact us for more details.
© 2022 by Dancomair Engineering. All rights reserved.